Acetone ≥99.9% (dried basis), GC2™ for gas chromatography, for pesticide residue analysis, Burdick & Jackson™Supplier: Honeywell Research Chemicals
, Dimethyl ketone
B&J GC2 Solvents are developed for trace analysis at or below the part-per-billion level, using capillary gas chromatography. Each lot is performance tested to meet demanding GC specifications.
Samples of every B&J GC2 solvent are concentrated 1000-fold and tested by temperature-programmed capillary GC-FID. This analysis detects both low-boiling and high-boiling molecules, anything eluting from toluene through diesel fuel and other semi-volatile compounds of environmental interest.
Less than 1 ppb trace contamination for semi-volatiles with a molecular weight greater than toluene (92).
Ideal for EPA protocols
Actual lot chromatograms available upon request
Flame ionization GC: No peaks greater than one ng/mL, having a retention time of greater than diacetone alcohol, on a crossbonded 5% diphenyl/95% dimethyl polysiloxane capillary column for a splitless injection of a 1000-fold sample concentrate after exchange into hexane.
- Less than 1 ppb trace contamination for
- Semi-volatiles with a molecular weight
- Greater than toluene (92)
- Ideal for EPA protocols
- Actual lot chromatograms available upon request
MW: 58.08 g/mol
Boiling Pt: 56 °C
Melting Pt: -94.8 °C
Density: 0.79 g/cm³ (20 °C)
Flash Pt: -20 °C (closed cup)
Storage Temperature: Ambient
CAS Number: 67-64-1
Merck Index: 13,00067
Specification Test Results
|Electron Capture GC (as lindane)||2 ppt max.|
|Flame Ionization GC (as nonane)||1 ppb max.|
|GC Analysis (excluding water)||99.9 % min.|
|Refractive Index (20ºC)||1.3583 - 1.3589|
|Residue||1 mg/L max.|
|Water by Karl Fischer Titration||0.5 % max.|