Protector® Echo™ Floor-Mounted Filtered Fume Hoods, 43.7" Depth, Labconco Corporation

Supplier: Labconco
Protector®
183827821 183827401 183827220 183627220 183627221 183627200 183527221 183427220 183527602 183827201 183827600 183627201 183527801 183527200 183627821 183427221 183627421 183627202 183427621 183527821 183827200 183427420 183827801 183827621 183427421 183527220 183827221 183627402 183527201 183527620 183627800 183627621 183527402 183827400 183427201 183527421 183427202 183827800 183527601 183427821 183627620 183527420 183627602 183527400 183427820 183527820 183427400 183527401 183627802 183427620 183627401 183627820 183827402 183827601 183627420 183827421 183427801 183827802 183827620 183527600 183627400 183427601 183827602 183427802 183427602 183527800 183527202 183827202 183427402 183527621 183427401 183427800 183627600 183427200 183427600 183627601 183827820 183527802 183827420 183627801
76419-306EA 52896 USD
76419-306 76419-308 76419-302 76419-304 76419-188 76419-066 76419-300 76419-068 76419-074 76419-194 76419-076 76418-938 76419-196 76419-070 76418-936 76419-190 76418-934 76419-072 76419-192 76418-932 76418-930 76419-316 76419-318 76419-312 76419-314 76419-078 76419-198 76419-310 76419-084 76418-928 76418-926 76419-080 76419-082 76418-964 76418-962 76418-960 76419-324 76419-048 76419-202 76419-204 76419-166 76419-320 76419-286 76419-168 76419-322 76419-288 76419-046 76419-200 76419-052 76419-294 76419-172 76419-054 76419-296 76419-174 76418-958 76419-290 76419-292 76419-050 76418-956 76419-170 76418-954 76418-952 76418-950 76419-298 76419-056 76419-176 76419-058 76419-178 76419-184 76419-062 76419-186 76419-064 76418-948 76419-180 76418-946 76419-182 76418-944 76419-060 76418-942 76418-940
Protector® Echo™ Floor-Mounted Filtered Fume Hoods, 43.7" Depth, Labconco Corporation
Fume Hoods and Enclosures Ductless Fume Hoods
Fully-featured, energy-efficient fume hoods provide an environmentally-friendly solution to ducted fume hoods while simplifying installation. Ideal for oversized equipment.

  • Fully featured fume hood
  • Ducting is not required
  • Energy efficient
  • Environmentally friendly
  • Uses Erlab's Neutrodine Unisorb filtration
  • Four filter combinations available
  • 37.7" and 55.7" depths also available

The Protector® Echo™ Floor-Mounted Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured floor-mount fume hood that does not require ducting for easy installation. The Protector® Echo™ Floor-Mounted Filtered Fume Hood has a by-pass design and features many defining characteristics of Labconco Protector Hoods including the Eco-Foil™ Air Foil with Clean-Sweep openings, fiberglass-reinforced panel liner, fully closing sash, electrical receptacles and service fixtures.

The Neutrodine Unisorb Filter has been tested and found efficient on over 500 chemicals, and may last two years or more before requiring replacement. Because these filters allow the simultaneous handling of solvents, acids and bases, the Protector Echo may be used for a broad range of general chemistry fume hood applications. Plus, the use of these filters offers an eco-friendly solution to exhausting chemicals into the atmosphere. Options include acid or formaldehyde sensors or HEPA only for applications requiring particulate protection.

GFH Filtration Technology allows the Protector Echo Floor-Mounted Filtered Fume Hood to perform well beyond the SEFA 9-2010 DH III definition. User safety is maintained through numerous built-in features that constantly monitor and prevent unsafe conditions without relying on user practices or modifications. These safeguards include a sensor package that detects primary filter breakthrough of solvent and acid fumes, laboratory air quality, sash position and temperature, audio/visual alarms, and intelligent filter indication of type and status to prevent saturated filters being re-installed. The control box is conveniently located on the front of the hood and can be controlled by an app on the user’s phone.

Constructed with a glacier white powder-coated steel exterior and a chemical-resistant, fiberglass-reinforced, composite panel liner. Two tempered safety glass vertical-rising sashes with powder-coated aluminum sash handles and powder-coated steel sash tracks with Clean-Sweep slots. Upper sash handle also includes Clean-Sweep openings. Sash stop is 52" from the floor. 73.5" (187 cm) high sightline from the floor to the header panel and 63.6" (162 cm) loading height.

Accessories information: Each hood requires Neutrodine Unisorb Filters (sold separately). The number of filters needed depends on the hood's width. Optional accessories include HEPA Filter and prefilters.

Ordering information: The Protector Echo Floor-Mounted Filtered Fume Hood is available in three exterior depths: 37.7", 43.7" and 55.7".

Caution: The Lifetime Payback Questionnaire (LPQ) form is required for all Protector Echo Filtered Fume Hood orders. It must be completed in full, submitted, reviewed, and approved before an order can be processed. Lead times do not start until the LPQ is approved. Contact your sales representative or Labconco for more information or a copy of the form.
Order Now

Learn more

About VWR

Avantor is a vertically integrated, global supplier of discovery-to-delivery solutions for...

Learn more About VWR