Protector® Echo™ Floor-Mounted Filtered Fume Hoods, 37.7" Depth, Labconco Corporation

Supplier: Labconco
Protector®
183617801 183817401 183517800 183817200 183417421 183617802 183817420 183617621 183417402 183517602 183517401 183417201 183517202 183517802 183517201 183617820 183417400 183617601 183617420 183517221 183817800 183417202 183417221 183617800 183817821 183417800 183817601 183617401 183817820 183617602 183817801 183617402 183517220 183817400 183417821 183817201 183417602 183617400 183517421 183617600 183517402 183517601 183617221 183417802 183517420 183517820 183817421 183817221 183417401 183817600 183517821 183817802 183617201 183517200 183417220 183817220 183817402 183817621 183417801 183517621 183817620 183617202 183617620 183517400 183617821 183517801 183817602 183817202 183417601 183617421 183517600 183417600 183417620 183417621 183617200 183417820 183417200 183417420 183517620 183617220
76419-148EA 48231.5 USD
76419-148 76419-268 76419-026 76419-028 76419-144 76419-022 76419-264 76419-146 76419-024 76419-266 76419-030 76419-272 76419-150 76419-274 76419-032 76419-152 76419-270 76418-898 76418-896 76418-894 76418-892 76418-890 76419-038 76419-158 76419-276 76419-034 76419-154 76419-036 76419-278 76419-156 76419-162 76419-040 76419-282 76419-164 76419-284 76419-042 76418-924 76419-160 76419-280 76418-922 76418-888 76418-920 76418-886 76419-008 76419-126 76419-246 76419-128 76419-248 76419-006 76419-044 76418-918 76419-250 76419-010 76418-916 76419-252 76419-130 76418-914 76418-912 76418-910 76419-258 76419-016 76419-136 76419-018 76419-138 76419-012 76419-254 76419-132 76419-014 76419-256 76419-134 76418-908 76419-140 76419-260 76418-906 76419-142 76418-904 76419-262 76419-020 76418-902 76418-900
Protector® Echo™ Floor-Mounted Filtered Fume Hoods, 37.7" Depth, Labconco Corporation
Fume Hoods and Enclosures Ductless Fume Hoods
Fully-featured, energy-efficient fume hoods provide an environmentally-friendly solution to ducted fume hoods while simplifying installation. Ideal for oversized equipment.

  • Fully featured fume hood
  • Ducting is not required
  • Energy efficient
  • Environmentally friendly
  • Uses Erlab's Neutrodine Unisorb filtration
  • Four filter combinations available
  • 43.7" and 55.7" depths also available

The Protector® Echo™ Floor-Mounted Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured floor-mount fume hood that does not require ducting for easy installation. The Protector® Echo™ Floor-Mounted Filtered Fume Hood has a by-pass design and features many defining characteristics of Labconco Protector Hoods including the Eco-Foil™ Air Foil with Clean-Sweep openings, fiberglass-reinforced panel liner, fully closing sash, electrical receptacles and service fixtures.

The Neutrodine Unisorb Filter has been tested and found efficient on over 500 chemicals, and may last two years or more before requiring replacement. Because these filters allow the simultaneous handling of solvents, acids and bases, the Protector Echo may be used for a broad range of general chemistry fume hood applications. Plus, the use of these filters offers an eco-friendly solution to exhausting chemicals into the atmosphere. Options include acid or formaldehyde sensors or HEPA only for applications requiring particulate protection.

GFH Filtration Technology allows the Protector Echo Floor-Mounted Filtered Fume Hood to perform well beyond the SEFA 9-2010 DH III definition. User safety is maintained through numerous built-in features that constantly monitor and prevent unsafe conditions without relying on user practices or modifications. These safeguards include a sensor package that detects primary filter breakthrough of solvent and acid fumes, laboratory air quality, sash position and temperature, audio/visual alarms, and intelligent filter indication of type and status to prevent saturated filters being re-installed. The control box is conveniently located on the front of the hood and can be controlled by an app on the user’s phone.

Constructed with a glacier white powder-coated steel exterior and a chemical-resistant, fiberglass-reinforced, composite panel liner. Two tempered safety glass vertical-rising sashes with powder-coated aluminum sash handles and powder-coated steel sash tracks with Clean-Sweep slots. Upper sash handle also includes Clean-Sweep openings. Sash stop is 52" from the floor. 73.5" (187 cm) high sightline from the floor to the header panel and 63.6" (162 cm) loading height.

Accessories information: Each hood requires Neutrodine Unisorb Filters (sold separately). The number of filters needed depends on the hood's width. Optional accessories include HEPA Filter and prefilters.

Ordering information: The Protector Echo Floor-Mounted Filtered Fume Hood is available in three exterior depths: 37.7", 43.7" and 55.7".

Caution: The Lifetime Payback Questionnaire (LPQ) form is required for all Protector Airo Filtered Fume Hood orders. It must be completed in full, submitted, reviewed, and approved before an order can be processed. Lead times do not start until the LPQ is approved. Contact your sales representative or Labconco for more information or a copy of the form.
Order Now

Learn more

About VWR

Avantor is a vertically integrated, global supplier of discovery-to-delivery solutions for...

Learn more About VWR