Protector® Airo™ Filtered Fume Hoods, Labconco Corporation

Supplier: Labconco

Protector®
184310420 184310600 184300803 184410421 184410403 184310221 184410420 184310202 184310800 184300202 184310601 184300401 184300621 184410220 184410803 184300403 184300600 184310402 184310603 184410602 184410601 184300601 184300402 184300602 184410401 184310802 184300420 184300221 184410200 184310421 184310602 184300421 184310203 184300820 184310621 184300801 184300201 184410600 184410801 184410603 184410800 184410203 184300802 184300400 184410402 184310820 184300200 184310821 184410400 184410621 184410820 184310620 184300800 184410802 184300620 184410221 184310200 184310220 184310201 184310403 184300821 184410620 184300203 184310803 184300220 184410202 184310801 184300603 184310401 184410821 184310400 184410201
76419-434EA 24194.39 USD
76419-434 76419-438 76419-408 76419-484 76419-480 76419-424 76419-482 76419-418 76419-450 76419-370 76419-440 76419-380 76419-400 76419-470 76419-504 76419-384 76419-390 76419-430 76419-444 76419-490 76419-488 76419-392 76419-382 76419-394 76419-476 76419-454 76419-386 76419-376 76419-462 76419-436 76419-442 76419-388 76419-420 76419-410 76419-448 76419-404 76419-368 76419-486 76419-500 76419-492 76419-498 76419-468 76419-406 76419-378 76419-478 76419-458 76419-366 76419-460 76419-474 76419-496 76419-506 76419-446 76419-402 76419-502 76419-398 76419-472 76419-414 76419-422 76419-416 76419-432 76419-412 76419-494 76419-372 76419-456 76419-374 76419-466 76419-452 76419-396 76419-428 76419-508 76419-426 76419-464
Protector® Airo™ Filtered Fume Hoods, Labconco Corporation
Fume Hoods and Enclosures Ductless Fume Hoods
Fully-featured, energy-efficient fume hoods provide an environmentally-friendly solution to ducted fume hoods while simplifying installation due to their compact footprint.

  • Fully featured fume hoods
  • Ducting is not required
  • Energy efficient
  • Environmentally friendly
  • Uses Erlab's Neutrodine Unisorb filtration
  • Four filter combinations available

The Protector® Airo™ Filtered Fume Hood has a compact design that avoids potential challenges of existing laboratory conditions while still providing space, utility and options of a traditional hood. It features all of the characteristics of Labconco Protector Hoods including the patented Eco-Foil™ Air Foil with Clean-Sweep openings to pull inflow air into the hood in non-turbulent air streams, fiberglass-reinforced panel liner, by-pass airflow design, electrical receptacles and service fixtures. The Clean-Sweep™ Sash Handle and Sash Tracks bleed air away from the user’s breathing zone. These features are paired with a design often relegated to small ductless enclosures - a lower height, compact footprint that requires no ductwork.

Rather than using application-specific carbon filtration, the Protector Airo uses Neutrodine Unisorb Filters, the most comprehensive, safety-driven carbon filter available. The Neutrodine Filter has been tested and found efficient on over 500 chemicals, and may last two years or more before requiring replacement. Because these filters allow the simultaneous handling of solvents, acids and bases, the Protector Airo may be used for a broad range of general chemistry fume hood applications. Plus, the use of these filters offers an eco-friendly solution to exhausting chemicals into the atmosphere. Options include acid or formaldehyde sensors or HEPA only for applications requiring particulate protection.

Because the Protector Airo requires no connection to ductwork, initial building infrastructure change costs are minimized and allows the hood to be placed in hard-to-duct areas. Should laboratory configurations change, the Protector Airo may be relocated without disrupting existing heating and air conditioning systems. Furthermore, its lower height allows it to fit in spaces with ceiling heights as low as 8 feet - a full 12" less than traditional hoods.

User safety is maintained through numerous built-in features that constantly monitor and prevent unsafe conditions without relying on user practices or modifications. These safeguards include multiple audio/visual alarms including filter breakthrough and fan failure. GFH Filtration Technology allows the Protector Airo to perform beyond the typical DH III ductless fume hood. The control box is conveniently located on the front of the hood and can be controlled by an app on the user’s phone.

Constructed with a glacier white powder-coated steel exterior and a chemical-resistant, fiberglass-reinforced, composite panel liner. The vertical-rising sash is a single piece of tempered safety glass with cable pulley and tracks with Clean-Sweep™ airflow openings. Sash stop is at 16" sash opening height. Sash opens to 28" high for loading.

Accessories information: Each hood requires a work surface, base cabinet or stand, and Neutrodine Unisorb Filters (sold separately). The number of filters needed depends on the hood's width. Optional accessories include HEPA Filter and prefilters.

Ordering information: The Protector Airo benchtop Filtered Fume Hood is available in 3' and 4' widths. The 3' width is available in two exterior depths: 31.7" and 37.7".

Caution: The Lifetime Payback Questionnaire (LPQ) form is required for all Protector Airo Filtered Fume Hood orders. It must be completed in full, submitted, reviewed, and approved before an order can be processed. Lead times do not start until the LPQ is approved. Contact your sales representative or Labconco for more information or a copy of the form.
Order Now

Learn more

About VWR

Avantor is a vertically integrated, global supplier of discovery-to-delivery solutions for...

Learn more About VWR